2017 Toyota Tacoma Oil Filter in Peoria, AZ

Yes—the oil filter on a 2017 Toyota Tacoma should be replaced at each oil change.

The filter captures debris until its media loads; once that happens, the bypass valve opens and oil circulates unfiltered. Replacing the filter with the oil resets cleanliness and helps protect your V6 between services. Follow the manufacturer’s schedule and your driving conditions. Book online to keep the interval on track.

• New, engine‑matched filter installed with a fresh gasket
• Oil replaced with the grade the manufacturer specifies
• Post‑service leak check at operating temperature

The old filter is removed, sealing surfaces are renewed, a matched new filter is installed, and the engine is leak‑checked after running to temperature.

We also replace the oil with the manufacturer‑specified grade for this engine. The gasket is lubricated and torqued correctly to prevent drips and ease future removal. After startup, we confirm oil pressure and inspect the filter base and drain point. Schedule service online for a seamless visit.

• Correct filter for the Tacoma’s 3.5‑liter V6
• Fresh gasket and clean mounting pad
• Hot leak inspection and indicator reset as applicable

The filter can load up, trigger its bypass valve, and allow unfiltered oil to circulate through the engine.

Unfiltered oil still lubricates but carries abrasive particles that quietly increase wear. Over time, that can affect pressure stability and component life. Replacing the filter with the oil change prevents debris accumulation from reaching the bypass point. If you’re unsure of the last service, schedule appointment to have it inspected and replaced.

• Bypass valve flow means oil is unfiltered
• Increased internal wear over time
• Simple fix: replace filter with every oil change

Yes—the filter must be matched to the Tacoma’s 3,456 cc, 6‑cylinder engine; filters are not interchangeable across engines.

A correctly matched filter ensures proper fit, sealing, flow rate, and bypass characteristics for this V6. Using a generic or incorrect filter risks leaks, pressure issues, or premature bypass. Our service team installs a filter that suits this engine and the oil grade the manufacturer specifies. If you need help selecting the right part, schedule service and we’ll handle it end to end.

• Engine‑specific fit and gasket geometry
• Correct bypass pressure and media capacity
• Installed and verified by Toyota technicians

It can be done, but it isn’t recommended because the old filter may send oil through the bypass valve and circulate unfiltered oil.

Keeping the old filter leaves captured debris in the system and can compromise flow as the media loads. Replacing the filter with the oil is a simple, effective way to maintain consistent protection. If the vehicle’s history is unknown, replacing both together is the prudent baseline. Use our online tool to schedule service now.

• Fresh oil plus fresh filter maintains system cleanliness
• Reduces risk of unfiltered bypass flow
• Supports stable oil pressure and wear control

Use our online portal to schedule service or schedule appointment, or call the store directly.

Booking online lets you choose a time, note concerns, and review service specials before you arrive. If you prefer to speak with our team in Peoria, call the number on this page. We’ll confirm details and get your 2017 Toyota Tacoma set for oil and filter service.

• Click schedule service to pick a time: {{rooftop.scheduler_url}}
• Review current offers on our service specials page
• Bring your Tacoma in for installation and a leak check