2024 Toyota Highlander Oil Filter in Peoria, AZ

Yes, the oil filter should be replaced with every oil change on a 2024 Toyota Highlander.

As the filter loads with debris, its bypass valve can open, allowing oil to circulate unfiltered to protect flow. That’s why pairing fresh oil with a new filter preserves effective filtration throughout the service interval. Follow the manufacturer’s maintenance schedule and your service history to choose the right timing.

• Prevents unfiltered oil circulation after the bypass opens
• Maintains stable oil pressure and flow
• Resets filtration capacity for the full interval

The service installs a new, engine-matched filter, renews sealing surfaces, refills with specified oil, and verifies leaks after the engine runs.

Your technician removes the used filter, cleans the mounting base, fits a new gasketed filter, and addresses the drain plug sealing surface. The crankcase is filled with the oil grade the manufacturer specifies for this engine, then run to operating pressure. A final level check and inspection confirm proper sealing.

• Filter installed to match this engine’s specification
• Gasket and drain plug sealing surfaces renewed
• Post-start leak check and oil level verification

The filter can load and trigger its bypass, sending unfiltered oil through the engine and quietly increasing wear.

Oil will still flow to prevent starvation, but without active filtration, abrasive particles recirculate. Over time this undermines protection, especially in heat and stop-and-go driving. Replacing the filter with the oil restores full filtration capacity and helps stabilize long-term performance.

• Bypass flow means unfiltered circulation under load
• Increased bearing and cam surface wear risk
• Shorter effective life of fresh oil

Yes, the filter is matched to this 2.4-liter, 4-cylinder engine and filters are not interchangeable across engines.

Proper fit, media area, and bypass calibration are engineered to this application. Using a non-matched filter can compromise sealing, flow, or filtration performance. Service with the correct filter ensures the bypass activates as designed and that the gasket seals reliably.

• Correct thread, gasket diameter, and bypass setting
• Media capacity suited to the engine’s oil flow
• Designed to work with the specified oil grade

It can be done, but it isn’t recommended because the loaded filter may force bypass and circulate unfiltered oil.

Keeping an old filter with fresh oil reduces overall protection and shortens the useful life of the new oil. The best practice is to replace both together so filtration capacity matches the interval. Follow the manufacturer’s schedule and your vehicle’s service history.

• Preserves filtration for the full oil interval
• Reduces risk of unfiltered bypass flow
• Supports stable oil pressure and cleanliness

Book online to schedule service or schedule appointment, or call {{rooftop.phone}}.

Choose a time that fits your day and add notes about your 2024 Toyota Highlander so our team is ready. You can also review current service specials before you confirm. Our service advisors will review the work and answer questions at drop-off.

• 24/7 online scheduling access
• Clear service write-up and post-service review
• Located at 8633 W Bell Rd, Peoria, AZ 85382