2025 Toyota 4Runner Oil Filter in Peoria, AZ

Yes—under normal maintenance, the oil filter is replaced with every oil change on a 2025 Toyota 4Runner.

This aligns with the manufacturer’s maintenance approach because once a filter loads with debris, its bypass valve opens and oil circulates unfiltered. If your usage is severe or the service history is uncertain, follow the maintenance reminder or consult the schedule. Replacing the filter each time keeps wear particles out of circulation.

• Prevents unfiltered oil flow when the bypass opens
• Maintains stable oil pressure and lubrication quality
• Matches the service interval indicated by the vehicle

The service includes removing the old filter, installing a new engine-matched filter with a renewed seal, adding the specified oil, and performing a warm-engine leak check.

Technicians clean the mounting surface, lightly oil the new gasket, torque the filter correctly, and refill with the oil grade the manufacturer specifies for this engine. After starting and warming the engine, they verify no leaks at the filter or drain plug, reset the maintenance reminder when applicable, and recycle used oil and the filter.

• Engine-matched filter fitted with a fresh gasket
• Oil replaced with the specified grade
• Leak check and maintenance light reset

As the filter loads, its bypass valve opens and the engine circulates unfiltered oil, increasing quiet, long-term wear.

The filter’s job is to trap particles the oil carries away; when it’s saturated, flow is maintained by bypassing the filter media. That avoids starvation but allows abrasive particles to recirculate. Over time, that can accelerate wear on bearings and other lubricated parts—even if you can’t hear or feel it immediately.

• Higher risk of abrasive particles in circulation
• Potential for accelerated internal component wear
• Loss of the filter’s protective function under bypass

Yes—the filter is matched to the 4.0-liter V6, and filters are not interchangeable across different engines.

Fit and filtration characteristics vary by displacement, cylinder count, and mounting design, so using a filter intended for the 4.0-liter V6 ensures proper sealing, flow, and bypass behavior. The correct filter helps maintain oil pressure and protects against unfiltered flow when the media loads. Your service advisor will select the proper unit for this engine.

• Engine-specific fit and gasket design
• Correct flow and bypass characteristics
• Maintains intended oil pressure and filtration

It can be done, but it defeats the purpose—an unchanged filter may go into bypass and circulate unfiltered oil.

Replacing the filter with the oil ensures debris captured during the last interval is removed from the system. If you’re catching up on maintenance or have severe use, replacing both together is a simple, effective way to protect the engine. Follow the maintenance reminder and service history to decide timing.

• Removes debris-laden filter media
• Reduces risk of bypassed, unfiltered oil
• Keeps intervals aligned for simplicity

Use our online tool to schedule service, call {{rooftop.phone}}, or stop by our Peoria location.

Scheduling online is quick and lets you choose a time that fits your day; you can also review current service specials before you book. If you prefer to speak with a service advisor, we’re happy to help by phone. We’re located off Loop 101 at 8633 W Bell Rd, Peoria, AZ 85382.

• Book online via our scheduler in minutes
• Call for guidance on appointment times
• Visit our Peoria service center in person